How to Install A Garage Door Opener?

Have your garage door aged more than 20 years? You should consider installing a new one. You can operate safely and easily with newer doors. Here is a step-by-step description about the installation  of a new door on your garage.


Release the tension:

When you install garage doors the experts at first release the tension in the torsion spring before they begin working on the garage door. They start by clamping adjustable locking pliers onto the torsion spring shaft and wed the pliers against the header wall which is above the door. Then they insert a steel rod into one of the holes in the spring winding cone, which has four holes and they are used for loosening and tightening. Garage door installation needs a steel rod to loosen the spring one-quarter turn at a time. Two rods need to be alternated for one to hold the cone steady and the other to turn the cone after the first rod is removed.

Disconnect the opener and door:

After releasing the tension it is time to disconnect the existing garage-door opener from the door. The next step is to remove the door panels. Start at the top panel, and remove the hinges that are connected to the panel below. Deal with the glass carefully. The track can be disconnected by unscrewing or unbolting it from the doorframe. If you want garage door opener installation service in Triangle for automatic door opener you should remove the opener's track from above and remove the existing opener.


Install the door panel:

If you want to install a two-car garage door, you should place a reinforcing bar on the top panel to prevent the door from bowing in the center. Make  sure the bar is centered on the panel. The experts secure the bar with screws drilling pilot holes.

Comments

Popular posts from this blog

3 Signs to Call a Professional Garge Door Opener Installer

When to Replace My Garage Door Spring?

Install a New Garage Door in Woodbridge and Upgrade Your Home